See the table below for complete product dimensions. Please note that the options noted are referring to the height of the digits, NOT overall display size. If you have a larger area, or want a more prominent display, then the 4 inch display may better meet your needs. Our 2-1/2 inch displays are typically recommended for viewing distances of less than 100 feet. Your personal preference and the mounting location of your display will help determine the size that you require. For initial setup, you will need access to your LAN with a standard Ethernet cable.ĭouble-Sided Clocks: Mounting plates for both ceiling and wall mount options will be provided with every double-sided clock, but the hardware (wall anchors & screws, drop mount pipe) are not included due to the needs and variability of mounting materials (concrete, drywall, ceilings, etc.) that are specific to each installation. WiFi: You will need access to an outlet for power (12V power supply is included) and sufficient WiFi network coverage at the location of your clock (WiFi antenna is included). If not, you will need a PoE injector or a PoE switch to supply power to the clock through the Ethernet cable. PoE: If your LAN is PoE-enabled, there is nothing further you need to purchase. Is there anything else I need for my TimeMachines display?
TM-Timer is free for download from the AppStore for iOS or from GooglePlay for Android.
TM-Manager is free for download from our website. These provide you additional timing capabilities for your displays.
TM-Manager and the TM-Timer Smartphone application are both compatible with either the PoE or WiFi displays. See our Terms and Conditions for specific information. All displays have a standard 1 year manufacturing warranty.
A full product manual is available for print or download from our website for both PoE and WiFi displays. All WiFi displays also come with a 12V power supply and a WiFi antenna, which are required for function. What is included with my purchase of a TimeMachines display?Ī Quick Startup Guide is included with both PoE and WiFi displays, as well as screws and anchors for mounting the displays to a wall. (NOTE: WPA2 Enterprise is NOT supported.) Due to the variation in WiFi systems and coverage, TimeMachines recommends location and compatibility testing prior to a bulk purchase.īoth POE and WiFi options are now available for the double-sided clock displays! These WiFi devices work only on a 2.4GHz frequency band and support Open, WPA, or WPA2 w/ pre-shared keys. To utilize the WiFi capabilities, the wireless LAN signal must be able to reach the device. Powered by a 12VDC power supply (included), you can use the built in WiFi connectivity with the included magnetic mount antenna, or you can connect the clock to the IP network with a Cat5 Ethernet cable. The WiFi displays have two options for sourcing synchronized time. Once it is synced, it will display the same time as your network time source and all of your other TimeMachines displays. Setup for the PoE displays is quick and simple - just plug in an Ethernet cable and ensure it’s connected to an active network. If you do not have a PoE enabled LAN, then you can purchase a PoE injector from TimeMachines as an accessory. Ask your IT specialist if your have a powered LAN, as there is no other way to provide power to these units. The power for these clocks is managed through the LAN with either a PoE switch, or a PoE injector. The PoE displays require a connection to a PoE (Power over Ethernet) enabled LAN (Local Area Network) through a Cat5 Ethernet cable. So read on to see if you have what you need for each option network configuration. Both our PoE and WiFi displays use Simple Network Time Protocol (SNTP) to make installation and set up as simple as possible. The first decision in finding the right display for your needs is to determine the type of network you will want to use.